购物车
  • 全部删除
  • TargetMol
    您的购物车当前为空

BMP-7 Protein, Human, Recombinant (His)

产品编号 TMPH-03819BMP-7 Protein, Human, Recombinant (His)

BMP-7 Protein, Human, Recombinant (His) is expressed in E. coli with N-6xHis. The accession number is P18075.

BMP-7 Protein, Human, Recombinant (His)

BMP-7 Protein, Human, Recombinant (His)

产品编号 TMPH-03819BMP-7 Protein, Human, Recombinant (His)
BMP-7 Protein, Human, Recombinant (His) is expressed in E. coli with N-6xHis. The accession number is P18075.
规格价格库存数量
20 μg
¥ 1,320
20日内发货
100 μg
¥ 2,470
20日内发货
1 mg
¥ 10,700
20日内发货
大包装 & 定制
加入购物车
TargetMol 的所有产品仅用作科学研究或药证申报,不能被用于人体,我们不向个人提供产品和服务。请您遵守承诺用途,不得违反法律法规规定用于任何其他用途。
实验操作小课堂
常见问题解答
超声应使用什么样的频率?
频率建议使用常规的超声清洗频率即可,一般在20 kHz - 100 kHz。
得到的杀死细胞的 IC50 与网页上 IC50 差距较大怎么办?
您所测试的IC50是指细胞的增殖抑制实验(半抑制率),细胞增殖抑制实验 IC50值,和网页上的靶点IC50其实是不同的意义。文献里和网页上 IC50其实往往是指对于靶点无细胞实验的抑制率,这样的实验一般是通过激酶或者蛋白纯化实验做出来的,nM 级别的浓度比较常见,但是细胞的增殖抑制实验 IC50 是指细胞的半致死率,同时牵涉到细胞的代谢以及渗透,一般浓度会高一些。 另外,同一个化合物对不同细胞模型的效果也是不同的,建议尝试增加孵育量、延长孵育时间。
抑制剂产品应如何储存?
粉末储存在 -20℃,可以存 3 年以上。 母液一般储存于 -80℃,可以存 1 年以上,建议多分装几管,避免反复冻融。 常用的存于 4℃,可放一周以上。
细胞实验中需要加多少抑制剂?
通常建议您参考同模型实验发表的文献报道;除参考文献报道以外,还需要通过预实验做“剂量-效应曲线”确定最佳作用浓度(浓度梯度);通过“时间-效应曲线”确定最佳孵育时间(处理时间梯度)。另外,抑制剂的使用量受多种因素影响,包括抑制对象的可接触性、细胞通透性、孵育时间、细胞种类等等。我们建议通过检索文献确定使用抑制剂的起始浓度。 如果有报道的 Ki 值或 IC50 值,可以采用其 5-10 倍的量开始尝试以达到抑制酶活性的最佳效果。 如果抑制剂的 Ki 值或 IC50 值未知,则需要在更广泛的范围尝试抑制剂的使用浓度,并采用 Michaelis-Menten 动力学计算 Ki 值。 一般设立溶解抑制剂时所采用的溶剂作为对照,以排除溶剂的非特异性影响。
PEG300 可以用 PEG400 替代吗?
PEG300 具有适度的粘稠度,有利于药物的溶解和给药过程,同时也能够提供良好的耐受性,不会对动物造成不良影响。PEG400 可以替代 PEG300。 PEG600 不是很建议,因为熔点接近常温。
查看更多

产品信息

生物活性
Activity has not been tested. It is theoretically active, but we cannot guarantee it.
产品描述
BMP-7 Protein, Human, Recombinant (His) is expressed in E. coli with N-6xHis. The accession number is P18075.
种属
Human
表达系统
E. coli
标签N-6xHis
蛋白编号P18075
别名
Osteogenic protein 1 (OP-1),OP1,Bone morphogenetic protein 7,BMP-7,BMP7
氨基酸序列
STGSKQRSQNRSKTPKNQEALRMANVAENSSSDQRQACKKHELYVSFRDLGWQDWIIAPEGYAAYYCEGECAFPLNSYMNATNHAIVQTLVHFINPETVPKPCCAPTQLNAISVLYFDDSSNVILKKYRNMVVRACGCH
蛋白构建
293-431 aa
蛋白纯度
>90% as determined by SDS-PAGE.
分子量19.7 kDa (Predicted)
内毒素< 1.0 EU/μg of the protein as determined by the LAL method.
缓冲液If the delivery form is liquid, the default storage buffer is Tris/PBS-based buffer, 5%-50% glycerol. If the delivery form is lyophilized powder, the buffer before lyophilization is Tris/PBS-based buffer, 6% Trehalose, pH 8.0.
复溶方法
Reconstitute the lyophilized protein in sterile deionized water. The product concentration should not be less than 100 μg/ml. Before opening, centrifuge the tube to collect powder at the bottom. After adding the reconstitution buffer, avoid vortexing or pipetting for mixing.
存储
Lyophilized powders can be stably stored for over 12 months, while liquid products can be stored for 6-12 months at -80°C. For reconstituted protein solutions, the solution can be stored at -20°C to -80°C for at least 3 months. Please avoid multiple freeze-thaw cycles and store products in aliquots.
运输方式In general, Lyophilized powders are shipping with blue ice. Solutions are shipping with dry ice.

SCI 文献

计算器

  • 复溶 计算器
  • 重组蛋白稀释 计算器
  • 比活力 计算器

技术支持

请阅读 重组蛋白用户指南 了解更多具体信息.

关键词