购物车
  • 全部删除
  • TargetMol
    您的购物车当前为空

Bat coronavirus HKU9 Spike glycoprotein (His)

产品编号 TMPH-00197

Bat coronavirus HKU9 Spike glycoprotein (His) is expressed in E. coli expression system with N-6xHis tag. The predicted molecular weight is 27.6 kDa and the accession number is A3EXG6.

Bat coronavirus HKU9 Spike glycoprotein (His)

Bat coronavirus HKU9 Spike glycoprotein (His)

产品编号 TMPH-00197
Bat coronavirus HKU9 Spike glycoprotein (His) is expressed in E. coli expression system with N-6xHis tag. The predicted molecular weight is 27.6 kDa and the accession number is A3EXG6.
规格价格库存数量
20 μg
¥ 1,320
20日内发货
100 μg
¥ 2,680
20日内发货
1 mg
¥ 11,700
20日内发货
大包装 & 定制
加入购物车
TargetMol 的所有产品仅用作科学研究或药证申报,不能被用于人体,我们不向个人提供产品和服务。请您遵守承诺用途,不得违反法律法规规定用于任何其他用途。
实验操作小课堂
常见问题解答
超声一般需要多久?
超声时长和溶解的量和浓度都有关,一般建议半个小时左右,如果浓度接近最大溶解度,或者需溶解的粉末较多,建议延长超声时间,并辅以加热。
小规格产品,收到瓶子后看不到任何东西?
由于产品规格小,粉末在运输过程中产生的静电导致过于分散,管壁和盖子上皆会粘着,您可以放心,离心后加入适量溶剂直接配制母液、充分溶解即可。
加药后检测结果没有作用,是不是产品质量有问题?
产品质量没有问题,都是经过两次严格质检的,HNMR确定产品结构,HPLC确定化合物纯度。同一个抑制剂由于实验材料(细胞、动物)的不同,IC50 和实验效果也是不一样的,不能照搬文献报道的方法,应该根据自己的实验设立浓度梯度,得到一个最适合的浓度。
产品的溶解度是多少?
建议您先查询TargetMol官网、陶术官网,看该抑制剂的产品介绍,找到溶解度信息。如果没有相应信息,建议联系技术对该化合物的溶解度进行测定。
如何稀释工作液?
根据您的工作液浓度,计算母液所需要稀释的倍数和所需母液的体积。建议用水、生理盐水、PBS等溶剂进行稀释,如果是细胞实验,可以使用培养基。 取适当的溶剂缓慢加入到母液中,直到达到您的工作液浓度,可以通过涡旋或者移液枪轻轻吹打帮助混匀。 我们的化合物大部分是脂溶性的,所以在使用 PBS 或者培养基等稀释工作液的时候,会有沉淀析出,这些都是正常现象,大多时候可以通过超声完全溶解。 工作液建议现配现用!
查看更多

产品信息

生物活性
Activity has not been tested. It is theoretically active, but we cannot guarantee it. If you require protein activity, we recommend choosing the eukaryotic expression version first.
产品描述
Bat coronavirus HKU9 Spike glycoprotein (His) is expressed in E. coli expression system with N-6xHis tag. The predicted molecular weight is 27.6 kDa and the accession number is A3EXG6.
种属
BtCoV
表达系统
E. coli
标签N-6xHis
蛋白编号A3EXG6
别名
Spike glycoprotein,S glycoprotein,Peplomer protein,E2
氨基酸序列
RAQVAGFVRVTQRGSYCTPPYSVLQDPPQPVVWRRYMLYDCVFDFTVVVDSLPTHQLQCYGVSPRRLASMCYGSVTLDVMRINETHLNNLFNRVPDTFSLYNYALPDNFYGCLHAFYLNSTAPYAVANRFPIKPGGRQSNSAFIDTVINAAHYSPFSYVYGLAVITLKPAAGSKLVCPVANDTVVITDRCVQY
蛋白构建
341-533 aa
蛋白纯度
> 90% as determined by SDS-PAGE.
分子量27.6 kDa (predicted)
内毒素< 1.0 EU/μg of the protein as determined by the LAL method.
缓冲液If the delivery form is liquid, the default storage buffer is Tris/PBS-based buffer, 5%-50% glycerol. If the delivery form is lyophilized powder, the buffer before lyophilization is Tris/PBS-based buffer, 6% Trehalose, pH 8.0.
复溶方法
Reconstitute the lyophilized protein in sterile deionized water. The product concentration should not be less than 100 μg/mL. Before opening, centrifuge the tube to collect powder at the bottom. After adding the reconstitution buffer, avoid vortexing or pipetting for mixing.
存储
Lyophilized powders can be stably stored for over 12 months, while liquid products can be stored for 6-12 months at -80°C. For reconstituted protein solutions, the solution can be stored at -20°C to -80°C for at least 3 months. Please avoid multiple freeze-thaw cycles and store products in aliquots.
运输方式In general, Lyophilized powders are shipping with blue ice. Solutions are shipping with dry ice.
研究背景
attaches the virion to the cell membrane by interacting with host receptor, initiating the infection.; mediates fusion of the virion and cellular membranes by acting as a class I viral fusion protein. Under the current model, the protein has at least three conformational states: pre-fusion native state, pre-hairpin intermediate state, and post-fusion hairpin state. During viral and target cell membrane fusion, the coiled coil regions (heptad repeats) assume a trimer-of-hairpins structure, positioning the fusion peptide in close proximity to the C-terminal region of the ectodomain. The formation of this structure appears to drive apposition and subsequent fusion of viral and target cell membranes.; Acts as a viral fusion peptide which is unmasked following S2 cleavage occurring upon virus endocytosis.

参考文献

SCI 文献

计算器

  • 复溶 计算器
  • 重组蛋白稀释 计算器
  • 比活力 计算器

技术支持

请阅读 重组蛋白用户指南 了解更多具体信息.

关键词