购物车
  • 全部删除
  • TargetMol
    您的购物车当前为空

Tubulin cofactor A Protein, Human, Recombinant

产品编号 TMPY-03059

Tubulin folding cofactor A belongs to the TBCA family. It is one of four proteins (cofactors A, D, E, and C) involved in the early step of the tubulin folding pathway. These proteins can fold intermediates and finally lead to correctly folded beta-tubulin. It is believed that tubulin folding cofactors A and D play a role in capturing and stabilizing beta-tubulin intermediates in a quasi-native confirmation. Tubulin folding cofactor E binds to the cofactor D/beta-tubulin complex; interaction with tubulin folding cofactor C then causes the release of beta-tubulin polypeptides that are committed to the native state.

Tubulin cofactor A Protein, Human, Recombinant

Tubulin cofactor A Protein, Human, Recombinant

产品编号 TMPY-03059
Tubulin folding cofactor A belongs to the TBCA family. It is one of four proteins (cofactors A, D, E, and C) involved in the early step of the tubulin folding pathway. These proteins can fold intermediates and finally lead to correctly folded beta-tubulin. It is believed that tubulin folding cofactors A and D play a role in capturing and stabilizing beta-tubulin intermediates in a quasi-native confirmation. Tubulin folding cofactor E binds to the cofactor D/beta-tubulin complex; interaction with tubulin folding cofactor C then causes the release of beta-tubulin polypeptides that are committed to the native state.
规格价格库存数量
100 μg
¥ 4,460
5日内发货
大包装 & 定制
加入购物车
TargetMol 的所有产品仅用作科学研究或药证申报,不能被用于人体,我们不向个人提供产品和服务。请您遵守承诺用途,不得违反法律法规规定用于任何其他用途。
实验操作小课堂
常见问题解答
如何选择合适的溶剂?
常用的溶剂包括DMSO、水、乙醇等。建议您根据抑制剂给出的溶解度参考,选择合适的溶剂。如果该抑制剂可以溶于DMSO,建议使用没有吸潮新开封的 DMSO,如果有潮气污染,很容易带来抑制剂降解或难溶的问题。如果该抑制剂可以溶于水,建议您根据实验类型选择无菌水、生理盐水、无菌 PBS 、培养基等作为溶剂。
如何稀释工作液?
根据您的工作液浓度,计算母液所需要稀释的倍数和所需母液的体积。建议用水、生理盐水、PBS等溶剂进行稀释,如果是细胞实验,可以使用培养基。 取适当的溶剂缓慢加入到母液中,直到达到您的工作液浓度,可以通过涡旋或者移液枪轻轻吹打帮助混匀。 我们的化合物大部分是脂溶性的,所以在使用 PBS 或者培养基等稀释工作液的时候,会有沉淀析出,这些都是正常现象,大多时候可以通过超声完全溶解。 工作液建议现配现用!
抑制剂母液的储存方式?
母液配置完成后,一般储存于 -80℃,可以存 1 年以上。建议多分装几管,避免反复冻融,常用的存于 4 度,可放一周以上。
收到产品发现冰盒都化了,怎么办?
一般化合物粉末对温度不敏感,加冰盒是为了防止极端气温,如果冰盒融化不影响产品质量。
是否能直接用缓冲液对抑制剂 DMSO 母液做梯度稀释?
大部分情况下,都是可以溶解的。但有时,有机试剂直接加入水相介质时会析出。建议将抑制剂先以DMSO做梯度稀释,再将经过稀释的抑制剂加入缓冲液或细胞培养基。有些抑制剂甚至只有在其工作浓度下才能溶于水相。 比如细胞实验中希望终浓度为 1 μM 的话,可以把 10 mM 的 DMSO 母液用 DMSO 稀释到 1 mM,再吸 2 μL 加入到 2 mL 的生理盐水/PBS/细胞培液,终浓度即为 1 μM。 为避免药物析出,稀释前,可将母液和培养基 37℃ 预热,避免温度低造成严重析出。若稀释过程中出现化合物析出的情况,建议您采用超声加热的方法使其复溶。
查看更多

产品信息

生物活性
Activity testing is in progress. It is theoretically active, but we cannot guarantee it. If you require protein activity, we recommend choosing the eukaryotic expression version first.
产品描述
Tubulin folding cofactor A belongs to the TBCA family. It is one of four proteins (cofactors A, D, E, and C) involved in the early step of the tubulin folding pathway. These proteins can fold intermediates and finally lead to correctly folded beta-tubulin. It is believed that tubulin folding cofactors A and D play a role in capturing and stabilizing beta-tubulin intermediates in a quasi-native confirmation. Tubulin folding cofactor E binds to the cofactor D/beta-tubulin complex; interaction with tubulin folding cofactor C then causes the release of beta-tubulin polypeptides that are committed to the native state.
种属
Human
表达系统
E. coli
标签Tag Free
蛋白编号O75347
别名
tubulin folding cofactor A
蛋白构建
A DNA sequence encoding the mature form of human TBCA (O75347) (Met1-Ala108) was expressed, with a N-terminal Met. Predicted N terminal: Met
蛋白纯度
> 95 % as determined by SDS-PAGE
分子量13 kDa (predicted); 16 kDa (reducing conditions)
内毒素Please contact us for more information.
缓冲液Lyophilized from a solution filtered through a 0.22 μm filter, containing PBS, pH 7.5. Typically, a mixture containing 5% to 8% trehalose, mannitol, and 0.01% Tween 80 is incorporated as a protective agent before lyophilization.
复溶方法
A Certificate of Analysis (CoA) containing reconstitution instructions is included with the products. Please refer to the CoA for detailed information.
存储
It is recommended to store recombinant proteins at -20°C to -80°C for future use. Lyophilized powders can be stably stored for over 12 months, while liquid products can be stored for 6-12 months at -80°C. For reconstituted protein solutions, the solution can be stored at -20°C to -80°C for at least 3 months. Please avoid multiple freeze-thaw cycles and store products in aliquots.
运输方式In general, Lyophilized powders are shipping with blue ice.
研究背景
Tubulin folding cofactor A belongs to the TBCA family. It is one of four proteins (cofactors A, D, E, and C) involved in the early step of the tubulin folding pathway. These proteins can fold intermediates and finally lead to correctly folded beta-tubulin. It is believed that tubulin folding cofactors A and D play a role in capturing and stabilizing beta-tubulin intermediates in a quasi-native confirmation. Tubulin folding cofactor E binds to the cofactor D/beta-tubulin complex; interaction with tubulin folding cofactor C then causes the release of beta-tubulin polypeptides that are committed to the native state.

参考文献

SCI 文献

计算器

  • 复溶 计算器
  • 重组蛋白稀释 计算器
  • 比活力 计算器

技术支持

请阅读 重组蛋白用户指南 了解更多具体信息.
失败
网络或系统异常,请稍后再试