购物车
  • 全部删除
  • TargetMol
    您的购物车当前为空

GPVI antagonist 3

Rating icon 还可以
产品编号 T61811Cas号 901654-94-2

GPVI antagonist 3 (Compound 2) is a potential antagonist that shows promising antiplatelet activity by selectively inhibiting the interaction between the Glycoprotein VI (GPVI) receptor and its ligands. It demonstrates potent inhibitory effects, with IC50 values of 1.01 μM for collagen, 1.92 μM for CRP, 7.24 μM for convulxin, and 51.74 μM for thrombin. GPVI is a major collagen receptor on platelets, making it an ideal target for safe and effective antithrombotic treatment. Therefore, GPVI antagonist 3 holds potential as a novel antiplatelet agent [1].

GPVI antagonist 3

GPVI antagonist 3

Rating icon 还可以
产品编号 T61811Cas号 901654-94-2

GPVI antagonist 3 (Compound 2) is a potential antagonist that shows promising antiplatelet activity by selectively inhibiting the interaction between the Glycoprotein VI (GPVI) receptor and its ligands. It demonstrates potent inhibitory effects, with IC50 values of 1.01 μM for collagen, 1.92 μM for CRP, 7.24 μM for convulxin, and 51.74 μM for thrombin. GPVI is a major collagen receptor on platelets, making it an ideal target for safe and effective antithrombotic treatment. Therefore, GPVI antagonist 3 holds potential as a novel antiplatelet agent [1].

规格价格库存数量
25 mg
¥ 10,600
6-8周
50 mg
¥ 13,800
6-8周
100 mg
¥ 17,500
6-8周
大包装 & 定制
加入购物车
TargetMol 的所有产品仅用作科学研究或药证申报,不能被用于人体,我们不向个人提供产品和服务。请您遵守承诺用途,不得违反法律法规规定用于任何其他用途。
实验操作小课堂
常见问题解答
准备进行动物实验,收到大包装粉末后,如何分装溶解?
根据配制出来的溶液是不是澄清的确定一次性能配多少:如果配制出来是澄清溶液,可以一次性多配制一些,储存于4度冰箱,大概一周配一次,放久了可能会失效;如果配制出来是混悬液,建议每次使用的时候都现配现用。
抑制剂是否可以高温灭菌?
大部分产品均通过化学方法合成,反应条件一般在 50-80℃ 之间,因此不建议使用高温灭菌法进行灭菌,建议用 0.22 μm 滤膜过滤灭菌。
溶解度中写的“< 1 mg/mL refers to the slightly soluble or insoluble ”是什么意思?
这句话指的是,如果溶解度 < 1 mg/mL,那我们就认为它是微溶或不溶的,这是针对写的“DMSO:Insoluble”或“DMSO:slightly soluble”这类化合物的。
细胞实验中,抑制剂如何溶解?
用 DMSO 配置较高浓度母液,母液存于 -80℃,建议多分装几管,一周内使用的存于 4℃,避免反复冻融。实验时用 pbs、生理盐水、培养基、水这些稀释,细胞实验DMSO的终浓度不超过 0.1%。如果超过 0.1%,则需要在做预试验的时候,先进行溶剂阴性对照实验,排除溶剂对细胞的影响。
抑制剂能否用于动物实验?
可以的,我们的抑制剂都可以用于动物/体内实验。但有些化合物还没有用于动物实验的文献,这种情况下,建议您先做预实验,确保研究的可行性。
查看更多
联系我们获取更多批次信息

产品介绍

生物活性
产品描述
GPVI antagonist 3 (Compound 2) is a potential antagonist that shows promising antiplatelet activity by selectively inhibiting the interaction between the Glycoprotein VI (GPVI) receptor and its ligands. It demonstrates potent inhibitory effects, with IC50 values of 1.01 μM for collagen, 1.92 μM for CRP, 7.24 μM for convulxin, and 51.74 μM for thrombin. GPVI is a major collagen receptor on platelets, making it an ideal target for safe and effective antithrombotic treatment. Therefore, GPVI antagonist 3 holds potential as a novel antiplatelet agent [1].
化学信息
分子量393.44
分子式C22H23N3O4
CAS No.901654-94-2
储存&溶解度
存储Powder: -20°C for 3 years | In solvent: -80°C for 1 year | Shipping with blue ice.

计算器

  • 摩尔浓度 计算器
  • 稀释 计算器
  • 配液 计算器
  • 分子量 计算器

体内实验配液计算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:
TargetMol | Animal experiments比如您的给药剂量是 10 mg/kg ,每只动物体重 20 g ,给药体积 100 μLTargetMol | Animal experiments 一共给药动物 10 只 ,您使用的配方为 5% TargetMol | reagent DMSO+ 30%PEG300+ 5%Tween 80 + 60% ddH2O. 那么您的工作液浓度为 2 mg/mL
母液配置方法: 2 mg 药物溶于 50 μLDMSOTargetMol | reagent ( 母液浓度为 40 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。
体内配方的制备方法:50μLDMSOTargetMol | reagent 母液,添加 300 μLPEG300TargetMol | reagent 混匀澄清,再加 50μLTween 80, 混匀澄清,再加 600μLddH2OTargetMol | reagent 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

1 请输入动物实验的基本信息
mg/kg
g
μL
2 请输入动物体内配方组成,不同的产品配方组成不同,如有配方需求,可先联系我们提供正确的体内配方。
% DMSO
%
%Tween 80
%ddH2O

剂量转换

对于不同动物的给药剂量换算,您也可以参考 更多

评论列表

4个月前
5.0
Rating icon 很棒

评论内容

Related Tags: buy GPVI antagonist 3 | purchase GPVI antagonist 3 | GPVI antagonist 3 cost | order GPVI antagonist 3 | GPVI antagonist 3 chemical structure | GPVI antagonist 3 formula | GPVI antagonist 3 molecular weight