购物车
  • 全部删除
  • TargetMol
    您的购物车当前为空

STAT6 Protein, Human, Recombinant (Monomer, His)

产品编号 TMPY-07111

STAT6 Protein, Human, Recombinant (Monomer, His) is expressed in Baculovirus-Insect Cells. The accession number is P42226-1.

STAT6 Protein, Human, Recombinant (Monomer, His)

STAT6 Protein, Human, Recombinant (Monomer, His)

产品编号 TMPY-07111
STAT6 Protein, Human, Recombinant (Monomer, His) is expressed in Baculovirus-Insect Cells. The accession number is P42226-1.
规格价格库存数量
100 μg
¥ 4,970
期货
1 mg 待询 期货
大包装 & 定制
加入购物车
TargetMol 的所有产品仅用作科学研究或药证申报,不能被用于人体,我们不向个人提供产品和服务。请您遵守承诺用途,不得违反法律法规规定用于任何其他用途。
实验操作小课堂
常见问题解答
如何稀释工作液?
根据您的工作液浓度,计算母液所需要稀释的倍数和所需母液的体积。建议用水、生理盐水、PBS等溶剂进行稀释,如果是细胞实验,可以使用培养基。 取适当的溶剂缓慢加入到母液中,直到达到您的工作液浓度,可以通过涡旋或者移液枪轻轻吹打帮助混匀。 我们的化合物大部分是脂溶性的,所以在使用 PBS 或者培养基等稀释工作液的时候,会有沉淀析出,这些都是正常现象,大多时候可以通过超声完全溶解。 工作液建议现配现用!
产品溶解需要超声吗?如果没有超声仪怎么办?
超声可以加快粉末的溶解速度,如果您的化合物溶解不了,建议您尝试超声。如果您没有超声仪,建议您选择较低母液浓度,或者较少粉末量,尝试溶解。
收到产品发现冰盒都化了,怎么办?
一般化合物粉末对温度不敏感,加冰盒是为了防止极端气温,如果冰盒融化不影响产品质量。
细胞实验中需要加多少抑制剂?
通常建议您参考同模型实验发表的文献报道;除参考文献报道以外,还需要通过预实验做“剂量-效应曲线”确定最佳作用浓度(浓度梯度);通过“时间-效应曲线”确定最佳孵育时间(处理时间梯度)。另外,抑制剂的使用量受多种因素影响,包括抑制对象的可接触性、细胞通透性、孵育时间、细胞种类等等。我们建议通过检索文献确定使用抑制剂的起始浓度。 如果有报道的 Ki 值或 IC50 值,可以采用其 5-10 倍的量开始尝试以达到抑制酶活性的最佳效果。 如果抑制剂的 Ki 值或 IC50 值未知,则需要在更广泛的范围尝试抑制剂的使用浓度,并采用 Michaelis-Menten 动力学计算 Ki 值。 一般设立溶解抑制剂时所采用的溶剂作为对照,以排除溶剂的非特异性影响。
如何设置母液浓度?
母液浓度需低于官网给出的溶解度,在这个范围内,根据工作液浓度设置母液浓度,细胞实验中,建议母液浓度设定在工作液浓度的 1000 倍以上。
查看更多

产品信息

生物活性
Activity testing is in progress. It is theoretically active, but we cannot guarantee it. If you require protein activity, we recommend choosing the eukaryotic expression version first.
产品描述
STAT6 Protein, Human, Recombinant (Monomer, His) is expressed in Baculovirus-Insect Cells. The accession number is P42226-1.
种属
Human
表达系统
Baculovirus Insect Cells
标签C-His
蛋白编号P42226-1
别名
STAT6C,STAT6B,IL-4-STAT,HIES6,D12S1644
蛋白构建
A DNA sequence encoding the human STAT6 isoform 1 (P42226-1) (Met1-Trp847) was fused with a polyhistidine tag at the C-terminus.
蛋白纯度
≥ 90% as determined by SDS-PAGE. ≥ 90% as determined by SEC-HPLC.
分子量95.5 kDa (predicted); 97.6 kDa (reducing contition)
内毒素< 1.0 EU per μg protein as determined by the LAL method.
缓冲液Lyophilized from sterile 20 mM Tris, 500 mM NaCl, 20% Glycerol, 0.3 mM DTT, pH 7.4. Please contact us for any concerns or special requirements. Normally 5 % - 8 % trehalose, mannitol and 0.01% Tween 80 are added as protectants before lyophilization. Please refer to the specific buffer information in the hardcopy of datasheet or the lot-specific COA.
复溶方法
Please refer to the lot-specific COA.
存储
It is recommended to store recombinant proteins at -20°C to -80°C for future use. Lyophilized powders can be stably stored for over 12 months, while liquid products can be stored for 6-12 months at -80°C. For reconstituted protein solutions, the solution can be stored at -20°C to -80°C for at least 3 months. Please avoid multiple freeze-thaw cycles and store products in aliquots.
运输方式In general, Lyophilized powders are shipping with blue ice.
研究背景
Signal transducer and activator of transcription 6 (STAT6) is a transcription factor that is activated by interleukin-4 (IL-4)-induced tyrosine phosphorylation and mediates most of the IL-4-induced gene expression. STAT6 plays a central role in exerting interleukin-4 (IL-4) mediated biological responses and is found to induce the expression of BCL2L1/BCL-XL, which is responsible for the anti-apoptotic activity of IL4. Transcriptional activation by STAT6 requires the interaction with coactivators like p300 and the CREB-binding protein (CBP). NF-κB and tyrosine-phosphorylated Stat6 can directly bind each other in vitro and in vivo, which suggests that the direct interaction between Stat6 and NF-κB may provide a basis for synergistic activation of transcription by IL-4 and activators of NF-κB.

SCI 文献

计算器

  • 复溶 计算器
  • 重组蛋白稀释 计算器
  • 比活力 计算器

技术支持

请阅读 重组蛋白用户指南 了解更多具体信息.
失败
网络或系统异常,请稍后再试