购物车
  • 全部删除
  • TargetMol
    您的购物车当前为空

Fibrin Protein, Mouse, Recombinant (His & Myc)

产品编号 TMPH-02657

Fibrin Protein, Mouse, Recombinant (His & Myc) is expressed in Baculovirus insect cells with N-10xHis and C-Myc tag. The predicted molecular weight is 26.5 kDa and the accession number is Q9CQS3.

Fibrin Protein, Mouse, Recombinant (His & Myc)

Fibrin Protein, Mouse, Recombinant (His & Myc)

产品编号 TMPH-02657
Fibrin Protein, Mouse, Recombinant (His & Myc) is expressed in Baculovirus insect cells with N-10xHis and C-Myc tag. The predicted molecular weight is 26.5 kDa and the accession number is Q9CQS3.
规格价格库存数量
20 μg
¥ 3,120
20日内发货
100 μg
¥ 9,630
20日内发货
1 mg
¥ 19,200
20日内发货
大包装 & 定制
加入购物车
TargetMol 的所有产品仅用作科学研究或药证申报,不能被用于人体,我们不向个人提供产品和服务。请您遵守承诺用途,不得违反法律法规规定用于任何其他用途。
实验操作小课堂
常见问题解答
收到化合物后,是否需要称量后配制储备液?
对于小包装,如 1 mg、5 mg、10 mg 等,不建议二次称量。这样会导致化合物损耗,且无法估算。TargetMol 所有产品原装进口,精准称量,您收到后可直接添加相应量溶剂。 对于大包装,如果您需要分批次实验,可每次称量后配制储备液,建议您 10 mg 起称,称量的误差会小一些;当然条件允许,也可以先配制成高浓度母液,分装备用。
如果低于说明书给出的最高溶解度情况下,产品仍未溶解怎么办?
建议您使用一些辅助溶解方法,如水浴加热至 45℃ 或用超声震荡,加速粉末溶解。
溶解度写的“mg/mL”和“mM”是什么意思?
mg/mL 与 mM,是两种不同单位的表示方式,所指代的最大溶解度是一样的,可以通过官网网页下方的摩尔浓度计算器进行换算
超声应使用什么仪器?
建议使用“超声清洗仪”,不推荐用“超声破碎仪”。
收到粉状试剂粘壁严重,如何处理?
建议您用离心机 3000 rpm下离心一会儿,将粉末收集到管底。
查看更多

产品信息

生物活性
Activity has not been tested. It is theoretically active, but we cannot guarantee it. If you require protein activity, we recommend choosing the eukaryotic expression version first.
产品描述
Fibrin Protein, Mouse, Recombinant (His & Myc) is expressed in Baculovirus insect cells with N-10xHis and C-Myc tag. The predicted molecular weight is 26.5 kDa and the accession number is Q9CQS3.
种属
Mouse
表达系统
Baculovirus Insect Cells
标签N-10xHis, C-Myc
蛋白编号Q9CQS3
别名
Fin bud initiation factor homolog,Fibin
氨基酸序列
YFDGPLYPEMSNGTLHHYFVPDGDYEENDDPEKCQLLFRVSDRRRCSQGEGGQASSLLSLTLREEFTVLGRQVEDAGRVLEGISKSISYDLDGEESYGKYLRRESHQIGDAYSNSDKSLTELESKFKQGQEQDSRQESRLNEDFLGMLVHTRSLLKETLDISVGLRDKYELLAHTIRSHGTRLGRLKSDYLEGGAQKTG
蛋白构建
19-217 aa
蛋白纯度
> 85% as determined by SDS-PAGE.
分子量26.5 kDa (predicted)
内毒素< 1.0 EU/μg of the protein as determined by the LAL method.
缓冲液If the delivery form is liquid, the default storage buffer is Tris/PBS-based buffer, 5%-50% glycerol. If the delivery form is lyophilized powder, the buffer before lyophilization is Tris/PBS-based buffer, 6% Trehalose, pH 8.0.
复溶方法
Reconstitute the lyophilized protein in sterile deionized water. The product concentration should not be less than 100 μg/mL. Before opening, centrifuge the tube to collect powder at the bottom. After adding the reconstitution buffer, avoid vortexing or pipetting for mixing.
存储
Lyophilized powders can be stably stored for over 12 months, while liquid products can be stored for 6-12 months at -80°C. For reconstituted protein solutions, the solution can be stored at -20°C to -80°C for at least 3 months. Please avoid multiple freeze-thaw cycles and store products in aliquots.
运输方式In general, Lyophilized powders are shipping with blue ice. Solutions are shipping with dry ice.
研究背景
N/A

SCI 文献

计算器

  • 复溶 计算器
  • 重组蛋白稀释 计算器
  • 比活力 计算器

技术支持

请阅读 重组蛋白用户指南 了解更多具体信息.
失败
网络或系统异常,请稍后再试